Dida Machinery

  Email: sales@didajx.com
You are here: Home » Products » Plastic Coil Mat Extrusion Line » Plastic Mattress & Pillow Machine
Share to:

Plastic Mattress & Pillow Machine

The Plastic Mattress & Pillow Machine is a newly developed civil product machine of the company. Because of its reasonable structure, it has good performance in terms of strength and performance stability, and the product cost is relatively low. It has been widely used as the inner core of mattresses in Europe, America, Japan and Korea.

Quantity:

Plastic Mattress & Pillow Machine product introduction:


The Plastic Mattress & Pillow Machine is a newly developed civil product machine of the company. Because of its reasonable structure, it has good performance in terms of strength and performance stability, and its product cost is relatively low. It has been widely used as the core of mattresses in Europe, America, Japan, Korea and other countries. It can also be used. Protection outside the natural gas pipeline. The high-elastic mesh plastic cushion is designed according to the ergonomic principle. The jointless winding method and the pull-net support can balance the support of the human body and fully conform to the human body curve. The cervical vertebrae, lumbar vertebrae and leg wrists are no longer suspended. The human body function helps to eliminate fatigue as soon as possible, improve sleep, and create a natural, comfortable and healthy sleep.


Polymer Spinning Mattress Features:


1. Has good gas permeability and impact resistance


The breathability of the mattress affects the health and comfort of the sleep to a large extent, so the ventilation function is very important. Wastes, water vapors, etc. generated by people's metabolism during sleep will be continuously discharged through the skin. If the mattress is not breathable, these wastes cannot be released in time, which is very unfavorable to human health. In addition, a breathable mattress can also reduce the number of people turning over during sleep, prolong deep sleep time, and improve sleep quality.


2. Supporting the human body and reasonable hardness


According to statistics, nearly half of the people think that the bed currently sleeping can no longer meet the requirements for health and comfort. The quality of the mattress directly determines the comfort. The high elastic mattress core improves the quality of sleep and promotes sleep health. The ideal state of the human spine is the natural S-type. The low-quality mattress will bend the spine, and the pressure of the intervertebral disc will not be relaxed and relieved, causing people to turn over many times during sleep, while the high-elastic mattress core can give people The perfect "kind skin" experience.


3. It has the functions of anti-mildew, anti-bacteria, anti-mite and easy to clean.


At present, the mattress materials used in the inpatient departments of major hospitals are mostly straw woven mats, and a few hospitals use sponge mats. These two materials do not have the function of venting. The long-term use has a moist feeling, and the mattress is prone to mildew and deterioration. Especially for patients who cannot take care of themselves, the bed sheet mattress is easy to be soiled. This mattress can achieve easy cleaning, rapid drying, and odor removal.


4. The product is noise-free, durable and not easily deformed.


At present, the most difficult equipment for sports equipment used in schools is gym mats and high jump mats. Because of the use of the site, the pad is usually dusty inside and outside, and it is difficult to remove. Students use a large amount of dust when inhaling. The mattress is used as an alternative product for easy cleaning and deformation.


Finished product picture:

Plastic Mattress & Pillow Machine

Pillow Machine

Plastic Mattress


Equipment technical parameters:


No.1 Screw Loader
NO. Item Compendium
1 Power 2.2kw/2.95HP
2 Feeding Volume 200kg/440.91lb/h
No.2 SDR-SJ75/30 Single Screw Extruder
NO. Item Compendium
1 Framework Jointing By High-strength Steel
2 Gear Case Gear And Axle Was Made From High-strength Alloy Steel
3 Barrel Screw Material: 38CrMoA1A                                               Diameter Of The Screw: Ф75mm/2.952in                                              
L/D= 30:1
4 Cooling System Cooling Method: Wind Cooling
5 Barrel Flange Material: 45#
6 Velocity Modulation AC Frequency Control , Power55kw/73.75HP
7 Temperature Control Temperature Table: RKC.
 Temperature Components: Thermal Resistance(Pt 100)
8 Electric Power Source AC380V,50Hz
9 Reducer Brand SEW
10 Motor Brand WEG
No.3 Plate Type Screen-exchangeФ75
NO. Item Compendium
1 SpecificAtion Ф75mm/2.952in     
2 Hydraulic Station Typical Accumulator Loop,Single Circuit,Can Achieve High-volume High-pressure Conditions Of Work
 Power
1.5kw/2.011HP
No.4 T-Die1100mm
NO. Item Compendium
1 Effective Width 1100mm/43.3in
2 Material High-strength Alloy Steel
3 Heating Power 3kw/4.02HP/zone
No.5 Spinneret Plate
NO. Item Compendium
1 Shape Of Hole Round
2 Outlet Aperture 1mm/0.039in
3 Rows
No.6 SDR-PSSX1200 Molding Water Tank
NO. Item Compendium
1 Complete Appliance Moving Power 0.37kw/0.496HP
2 Tank Movements Mechanical Movements
3 Heating Way Far-infrared Heating Control
4 Water Level Adjustment Spillway ApproachManual Water Level Control
5 Efficiency Length Of Roller And Roll Surface 1200mm/47.244in
6 Speed Control Frequency Control
No.7 SDR-PSTS1200 Dewatering Devices (Wind Pressure)
NO. Item Compendium
1 Power 2.2kw/2.95HP
2 Efficiency Length Of Roller And Roll Surface 1200mm/47.244in
3 Dehydration Methods Blowing Pressure
No.8 Draper-type Transmission Frame
NO. Item Compendium
1 Power 1.5kw/2.011HP
2 Drive Draper-type
3 Efficiency Width Of Roller And Roll Surface 1200mm/47.244in
4 Speed Way Frequency Control
No.9 Trimming And Transverse Cutting Device
NO. Item Compendium
1 Transmission Power Of Longitudinal Motor 0.55kw/0.737HP
2 Transmission Power Of Cross Motor 0.55kw/0.737HP
3 Cutting Way No Teeth Sawing
No.10 Transmission Frame
NO. Item Compendium
1 Power 1.5kw/2.011HP
2 Drive Draper-type
3 Efficiency Width Of Roller And Roll Surface 1200mm/47.244in
4 Speed Way Frequency Control
No.11 Electrical Control And Use Of Components
NO. Item Compendium
1 PLC Control System And Touch Screen SIEMENS
2 Electrical Components ABB




CONTACT US

  Tel: +86-512-82598350
 Email: sales@didajx.com
  Add: No.462 Yangjin Road Jinfeng 
     Zhangjiagang  Jiangsu

FEEDBACK
Copyright 2019    Zhangjiagang Dida Machinery Co., Ltd.  All rights reserved.    Designed by iwonder.cn     Site Map